HOT ! CPC Package Halloween - 4 Spiders

Description

For non-modified use with RGBPlus Halloween sequences, the controller in this package must be connected to Network Aux A/Network 2. Each network in your show requires a USB485-HS Adapter (computer show) or an available port of a Showtime Director.

Our \"CPC\" packages include the \"Coro, Pixels, and Controller\" you need to easily add smart pixel props into to your display. These packages can be connected to an existing network of Gen3 Light-O-Rama Controllers, or used on a separate network within the same show. A Cat5 cable is required to connect this controller to existing controllers in a multi-controller network, or a computer/showtime director if it is the only Unit in the show.

S5.6.8 or higher is recommended for easiest use for personal sequence creation; a Pro license level is required to use Pixel Motion Effects. RGBPlus sequence requirements are listed per purchase page.

The Assembled Pixie4 controller includes the controller board and power supply wired and mounted in a weather-proof, ventilated and UL listed enclosure. The power supply is UL listed: MeanWell RSP-150-12 - 120/240V input - 12V - 12.5A output - with Power Factor Correction and extend temperature operating range. This is a 12 Volt controller system compatible with 12V RGB smart pixel strands and devices. Dumb RGB devices or standard LED / Incandescent lights cannot be plugged into the ports of this controller.

Included in this Package:

• 4 Coro Spiders - 100 Nodes Each. \"Pixel Path\" for pixel pushing included on the back of each prop.




• Approx. 23\" in diameter


• 10mm Black Coro






• 8 Strands of Black Bullet Pixels - 50 Ct (4\" spacing). LOR style connectors.


• Pixie4 Controller - Assembled -12V - With Black LOR Dangles Included

Optional Additions:

• 4 Pixel Extensions - Black (15ft)


• Cat5 Cable (50ft)

Not Included:

• Mounting material for home attachment


• Metal stakes or other ground mounting material

Our CPC packages can be used in a display with custom sequencing as long as the controller\'s Unit IDs do not conflict with any other Unit ID assignments on the network, and network limits have not been exceeded. To incorporate more than 4 spiders into your custom sequenced display, visit our collection of Prop Packages so you can use the Pixie controller that best suits your needs.

If you want more than 4 Spiders but still want to use our RGB Plus Sequences, just put multiples of this kit into your cart and make sure each controller uses the SAME Unit IDs when you set up your display. Read more about our sequences in the RGBPlus Sequence tab. 

Package Assembly

Pixels are not pre-pushed. Assembly is to be completed by the customer. 

When viewing the spider from the back, the Pixel Path \"star\" (for \"start\") should be near the center of the spider, with the pixel path continuing in a counterclockwise fashion around the body and legs until it reaches the \"square\" (for \"stop\").

Mount the props to your home or in your yard using standard ground stakes, zip ties, PVC or other mounting material of your choice.

What can your display look like with our CPC Packages? Take a look!

RGBPlus Sequences

To use the Spider CPC Package with our RGBPlus Sequences, the Pixie4 controller in this package must be connected to the AuxA network on your computer or Net 2 of your N2-G4 or N4-G4 Showtime Director. The Pro license level is required to play RGBPlus sequences. The software version required is listed on each RGBPlus sequence purchase page.

When viewing the spider from the back, the Pixel Path \"star\" (for \"start\") should be near the center of the spider, with the pixel path continuing in a counterclockwise fashion around the body and legs until it reaches the \"square\" (for \"stop\"). Spider \"1\" should be on the left of a horizontal row or on the top of a vertical row of spiders.

The Pixie4 should be given a base Unit ID of 1D; The four Unit IDs for the four ports of this Pixie4 controller (and therefore your spiders) must be 1D, 1E, 1F and 20, both physically on your controller and in your Preview, which correspond to ports 1, 2, 3, and 4 of your Pixie4. Learn more about setting the Unit ID of your Pixie controller using DIP switches by clicking here.

Learn more about using these props with our RGBPlus Sequences and altering networks/Unit IDs by clicking here.

User Manual

View the manual for the Pixie Controller by clicking here.

Misplace your CPC Package instructions? Read the digital copy here.

Warranty

The 2 Year warranty applies to the controller board included in this package. All other components have a standard 1 Year warranty.